This simple drawstring bag that is the very first thing that is taught in the Absolute Beginner Sewing class at Made on Marion. They are the perfect first project, and only take a bit of fun craft cotton and some ribbon to match.
They are perfect for fat quarters – you can make two bags like this from one fat quarter.
I love these bags, and have been making them for almost as long as I could sew. My mother doesn’t like wrapping presents, so I made her dozens of them in lovely festive fabric, and she just pops her presents in them – easy-peasy, looks gorgeous, and totally green and recyclable, because she’s still using the ones I made her 10 years ago!
These days I make little ones to keep my pearl necklaces in, middle sized ones to hold the accessories to each of my historical outfits, and bigger ones for sorting socks and unders when I travel, or pairs of shoes at home.
This tutorial makes a 20cm (8″) wide x 22cm (8 3/4″) long bag – perfect for a chunky pearl necklace, or a mobile phone.
To make a different sized bag your piece of fabric should be the width you want + 3cm (1 1/4″), and the length you want + 12cm (4 3/4″). Your ribbon length should be the width of your bag x2 + 30cm (11 3/4″).
For this tutorial you will need:
- One piece of fabric 23cm (9″) wide x 52cm (20 1/2″) long
- Two lengths of 1 – 1.4cm (3/8 – 1/2″) wide ribbon, each 60cm (23 1/2″) long
Step 1: The side seams
- Start with your long, narrow length of fabric. Fold it in half widthwise, and measure down 4cm (1 1/2″) from the cut ends. Make a mark. Measure down another 2cm (3/4″) and make another mark. Finish all four edges with zig-zag stitches if desired (I decided not to for this bag).
Your length of fabric 
The fabric folded in half, with pink markings from the top end - Using a standard stitch length (2.4-2.6) and a 1.5cm (5/8″) seam allowance, start at the top on one side of your folded fabric and backstitch. Stitch down to the first mark, and backstitch again. Leaving the 2cm space between the marks open, backstitch below the 2nd mark, and stitch down to the bottom of the fabric, backstitching at the end. The space between the marks will be where you thread your ribbon. Repeat on the other edge of your folded fabric.
The stitched side seam, with a gap left open for threading your ribbon
Step 2: Securing the ribbon holes.
- Press the two side seams that you just sewed open, so that the threading gap is nicely visible. Starting at the top (raw) edge of your bag and sewing through the outer fabric and the seam allowance so that you are sewing the seam allowance open, topstitch 7mm (1/4″) from the side seam down to just past the gap in the seam. Lower your needle, lift your foot, turn your fabric 90 degrees, sew across the bottom of the gap, turn your fabric again, and sew back up to the top of the fabric. Backstitch again.
Lifting the foot to turn the fabric and sew across the bottom of the threading gap - Repeat for the other side. Both of your threading gaps should now be nicely sewn open, so that it is easy to slip ribbon through them.
The topstitched threading gap from the outside of the bag 
Topstitched threading gap from the inside of the bag 
The bag so far
Step 3: Creating your threading channel for the ribbon.
- Turn the top edge of your fabric over 1cm (3/8″) and press.
Pressing the first 1cm fold - Turn the top edge again, this time 2.5cm (1″), so that the raw edge is completely enclosed, press.
Step 3: Sewing your threading channel for the ribbon.
- Using your sewing machine with the box off (free-arm sewing), slip your bag over the sewing machine arm and topstitch a line of stitching 2cm (7/8″) from the top edge of the bag around the entire top of the bag so the line of thread overlaps, backstitching as you begin and end.
Sewing the first line of stitching for the threading channel, 2cm from the top edge of the bag - Topstitch another line of stitching around the entire bag, 3mm (1/8″) from the top edge of the bag, backstitching at beginning and end. You’ve now created an enclosed channel that your ribbon can run through.
Sewing the second line of topstiching for your threading channel 
Your two lines of topstitching and the channel for the ribbon to run through
Step 4: Threading your ribbon
- Take one length of your ribbon, fold the end over a cm or so, and pin a safety pin through it. Insert the safety pin into one threading gap, and use it to thread the ribbon through the threading channel. Thread it past the gap in the channel, all the way back to the gap you inserted it in to. Tie the ends of the ribbon together.
The first length of ribbon inserted through, ready to be tied off - Using a safety pin, insert the other length of ribbon into the second threading gap, and thread it all the way around and back out in the same gap, in the same way you did it with the first ribbon. Tie off the end.
Inserting the second length of ribbon 
The second length of ribbon brought back out its original threading gap 
Both lengths of ribbon tied off
Ta da! Your bag is done. Tug on both lengths of ribbon at the same time to pull the bag closed, and tie off in a bow.
Hi
This is going to be my first sewing project, so forgive me if this is a stupid question, but how did you get the material length of 52cms. I am making a slightly bigger bag, so wanted to know what the calculation was to get the 52cms.
Hope you can help.
Many thanks
Jo
Hi Jo,
This bag tutorial was designed by Leimomi, from The Dreamstress School of Sewing.
To make a bigger bag you work out what size you want the finished bag to be, then add 3cm to the width, and add 8cm to the length, this will allow for seams (1.5cm) and hem (1cm, 3cm). So for example if you wanted a bag that was 50cm wide by 55cm long, then you would cut your rectangle 53cm wide by 118cm long. Does this make sense? Let us know if you have anymore questions.
Good Luck,
Brendan.